M95 × 6 Metric Thread Dimensions
Nominal diameter 95 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 91.103 mm. Basic minor diameter: 88.505 mm. Basic major diameter: 95 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 91.103 | 91.353 |
| Minor | 88.505 | 89.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.08 | Not specified |
| Pitch | 91.183 | 91.498 |
| Minor | 88.585 | 89.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 91.103 | 91.418 |
| Minor | 88.505 | 89.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.08 | Not specified |
| Pitch | 91.183 | 91.583 |
| Minor | 88.585 | 89.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 91.103 | 91.503 |
| Minor | 88.505 | 89.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.08 | Not specified |
| Pitch | 91.183 | 91.683 |
| Minor | 88.585 | 89.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 91.103 | 91.603 |
| Minor | 88.505 | 89.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.08 | Not specified |
| Pitch | 91.183 | 91.813 |
| Minor | 88.585 | 89.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 91.103 | 91.733 |
| Minor | 88.505 | 89.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 94.32 | 94.92 |
| Pitch | 90.723 | 91.023 |
| Root d3 | 87.027 | 87.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 94.32 | 94.92 |
| Pitch | 90.833 | 91.023 |
| Root d3 | 87.137 | 87.559 |
Cutting tap preparation
Pre-drill recommendation: 89 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 92.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.