M95 × 1.5 Metric Thread Dimensions
Nominal diameter 95 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 94.026 mm. Basic minor diameter: 93.376 mm. Basic major diameter: 95 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 94.026 | 94.166 |
| Minor | 93.376 | 93.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.032 | Not specified |
| Pitch | 94.058 | 94.238 |
| Minor | 93.408 | 93.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 94.026 | 94.206 |
| Minor | 93.376 | 93.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.032 | Not specified |
| Pitch | 94.058 | 94.282 |
| Minor | 93.408 | 93.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 94.026 | 94.25 |
| Minor | 93.376 | 93.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.032 | Not specified |
| Pitch | 94.058 | 94.338 |
| Minor | 93.408 | 93.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 94.026 | 94.306 |
| Minor | 93.376 | 93.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.032 | Not specified |
| Pitch | 94.058 | 94.413 |
| Minor | 93.408 | 93.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 94.026 | 94.381 |
| Minor | 93.376 | 93.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 94.732 | 94.968 |
| Pitch | 93.824 | 93.994 |
| Root d3 | 92.9 | 93.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 94.732 | 94.968 |
| Pitch | 93.888 | 93.994 |
| Root d3 | 92.964 | 93.128 |
Cutting tap preparation
Pre-drill recommendation: 93.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 94.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.