M95 × 2 Metric Thread Dimensions
Nominal diameter 95 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 93.701 mm. Basic minor diameter: 92.835 mm. Basic major diameter: 95 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 93.701 | 93.861 |
| Minor | 92.835 | 93.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.038 | Not specified |
| Pitch | 93.739 | 93.939 |
| Minor | 92.873 | 93.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 93.701 | 93.901 |
| Minor | 92.835 | 93.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.038 | Not specified |
| Pitch | 93.739 | 93.989 |
| Minor | 92.873 | 93.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 93.701 | 93.951 |
| Minor | 92.835 | 93.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.038 | Not specified |
| Pitch | 93.739 | 94.054 |
| Minor | 92.873 | 93.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 93.701 | 94.016 |
| Minor | 92.835 | 93.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.038 | Not specified |
| Pitch | 93.739 | 94.139 |
| Minor | 92.873 | 93.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 93.701 | 94.101 |
| Minor | 92.835 | 93.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 94.682 | 94.962 |
| Pitch | 93.473 | 93.663 |
| Root d3 | 92.241 | 92.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 94.682 | 94.962 |
| Pitch | 93.545 | 93.663 |
| Root d3 | 92.313 | 92.508 |
Cutting tap preparation
Pre-drill recommendation: 93 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 94.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.