M95 × 4 Metric Thread Dimensions
Nominal diameter 95 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 92.402 mm. Basic minor diameter: 90.67 mm. Basic major diameter: 95 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 92.402 | 92.614 |
| Minor | 90.67 | 91.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.06 | Not specified |
| Pitch | 92.462 | 92.727 |
| Minor | 90.73 | 91.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 92.402 | 92.667 |
| Minor | 90.67 | 91.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.06 | Not specified |
| Pitch | 92.462 | 92.797 |
| Minor | 90.73 | 91.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 92.402 | 92.737 |
| Minor | 90.67 | 91.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.06 | Not specified |
| Pitch | 92.462 | 92.887 |
| Minor | 90.73 | 91.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 92.402 | 92.827 |
| Minor | 90.67 | 91.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.06 | Not specified |
| Pitch | 92.462 | 92.992 |
| Minor | 90.73 | 91.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 92.402 | 92.932 |
| Minor | 90.67 | 91.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 94.465 | 94.94 |
| Pitch | 92.092 | 92.342 |
| Root d3 | 89.628 | 90.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 94.465 | 94.94 |
| Pitch | 92.182 | 92.342 |
| Root d3 | 89.718 | 90.033 |
Cutting tap preparation
Pre-drill recommendation: 91 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 93.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.