M95 × 3 Metric Thread Dimensions
Nominal diameter 95 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 93.051 mm. Basic minor diameter: 91.752 mm. Basic major diameter: 95 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 93.051 | 93.241 |
| Minor | 91.752 | 92.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.048 | Not specified |
| Pitch | 93.099 | 93.335 |
| Minor | 91.8 | 92.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 93.051 | 93.287 |
| Minor | 91.752 | 92.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.048 | Not specified |
| Pitch | 93.099 | 93.399 |
| Minor | 91.8 | 92.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 93.051 | 93.351 |
| Minor | 91.752 | 92.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.048 | Not specified |
| Pitch | 93.099 | 93.474 |
| Minor | 91.8 | 92.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 93.051 | 93.426 |
| Minor | 91.752 | 92.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95.048 | Not specified |
| Pitch | 93.099 | 93.574 |
| Minor | 91.8 | 92.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 95 | Not specified |
| Pitch | 93.051 | 93.526 |
| Minor | 91.752 | 92.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 94.577 | 94.952 |
| Pitch | 92.779 | 93.003 |
| Root d3 | 90.931 | 91.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 94.577 | 94.952 |
| Pitch | 92.863 | 93.003 |
| Root d3 | 91.015 | 91.271 |
Cutting tap preparation
Pre-drill recommendation: 92 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 93.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.