M76 × 6 Metric Thread Dimensions
Nominal diameter 76 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 72.103 mm. Basic minor diameter: 69.505 mm. Basic major diameter: 76 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 72.103 | 72.339 |
| Minor | 69.505 | 70.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.08 | Not specified |
| Pitch | 72.183 | 72.483 |
| Minor | 69.585 | 70.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 72.103 | 72.403 |
| Minor | 69.505 | 70.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.08 | Not specified |
| Pitch | 72.183 | 72.558 |
| Minor | 69.585 | 70.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 72.103 | 72.478 |
| Minor | 69.505 | 70.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.08 | Not specified |
| Pitch | 72.183 | 72.658 |
| Minor | 69.585 | 70.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 72.103 | 72.578 |
| Minor | 69.505 | 70.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.08 | Not specified |
| Pitch | 72.183 | 72.783 |
| Minor | 69.585 | 70.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 72.103 | 72.703 |
| Minor | 69.505 | 70.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.32 | 75.92 |
| Pitch | 71.743 | 72.023 |
| Root d3 | 68.047 | 68.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.32 | 75.92 |
| Pitch | 71.843 | 72.023 |
| Root d3 | 68.147 | 68.559 |
Cutting tap preparation
Pre-drill recommendation: 70 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 73.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.