M76 × 2 Metric Thread Dimensions
Nominal diameter 76 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 74.701 mm. Basic minor diameter: 73.835 mm. Basic major diameter: 76 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 74.701 | 74.851 |
| Minor | 73.835 | 74.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.038 | Not specified |
| Pitch | 74.739 | 74.929 |
| Minor | 73.873 | 74.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 74.701 | 74.891 |
| Minor | 73.835 | 74.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.038 | Not specified |
| Pitch | 74.739 | 74.975 |
| Minor | 73.873 | 74.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 74.701 | 74.937 |
| Minor | 73.835 | 74.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.038 | Not specified |
| Pitch | 74.739 | 75.039 |
| Minor | 73.873 | 74.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 74.701 | 75.001 |
| Minor | 73.835 | 74.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.038 | Not specified |
| Pitch | 74.739 | 75.114 |
| Minor | 73.873 | 74.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 74.701 | 75.076 |
| Minor | 73.835 | 74.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.682 | 75.962 |
| Pitch | 74.483 | 74.663 |
| Root d3 | 73.251 | 73.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.682 | 75.962 |
| Pitch | 74.551 | 74.663 |
| Root d3 | 73.319 | 73.508 |
Cutting tap preparation
Pre-drill recommendation: 74 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 75.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.