M76 × 1 Metric Thread Dimensions
Nominal diameter 76 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 75.35 mm. Basic minor diameter: 74.917 mm. Basic major diameter: 76 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 75.35 | 75.468 |
| Minor | 74.917 | 75.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.026 | Not specified |
| Pitch | 75.376 | 75.526 |
| Minor | 74.943 | 75.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 75.35 | 75.5 |
| Minor | 74.917 | 75.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.026 | Not specified |
| Pitch | 75.376 | 75.556 |
| Minor | 74.943 | 75.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 75.35 | 75.53 |
| Minor | 74.917 | 75.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.026 | Not specified |
| Pitch | 75.376 | 75.612 |
| Minor | 74.943 | 75.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 75.35 | 75.586 |
| Minor | 74.917 | 75.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.794 | 75.974 |
| Pitch | 75.184 | 75.324 |
| Root d3 | 74.568 | 74.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.794 | 75.974 |
| Pitch | 75.234 | 75.324 |
| Root d3 | 74.618 | 74.747 |
Cutting tap preparation
Pre-drill recommendation: 75 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 75.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.