M76 × 1.5 Metric Thread Dimensions
Nominal diameter 76 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 75.026 mm. Basic minor diameter: 74.376 mm. Basic major diameter: 76 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 75.026 | 75.158 |
| Minor | 74.376 | 74.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.032 | Not specified |
| Pitch | 75.058 | 75.228 |
| Minor | 74.408 | 74.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 75.026 | 75.196 |
| Minor | 74.376 | 74.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.032 | Not specified |
| Pitch | 75.058 | 75.27 |
| Minor | 74.408 | 74.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 75.026 | 75.238 |
| Minor | 74.376 | 74.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.032 | Not specified |
| Pitch | 75.058 | 75.323 |
| Minor | 74.408 | 74.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 75.026 | 75.291 |
| Minor | 74.376 | 74.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.032 | Not specified |
| Pitch | 75.058 | 75.393 |
| Minor | 74.408 | 74.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 75.026 | 75.361 |
| Minor | 74.376 | 74.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.732 | 75.968 |
| Pitch | 74.834 | 74.994 |
| Root d3 | 73.91 | 74.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.732 | 75.968 |
| Pitch | 74.894 | 74.994 |
| Root d3 | 73.97 | 74.128 |
Cutting tap preparation
Pre-drill recommendation: 74.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 75.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.