M76 × 4 Metric Thread Dimensions
Nominal diameter 76 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 73.402 mm. Basic minor diameter: 71.67 mm. Basic major diameter: 76 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 73.402 | 73.602 |
| Minor | 71.67 | 72.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.06 | Not specified |
| Pitch | 73.462 | 73.712 |
| Minor | 71.73 | 72.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 73.402 | 73.652 |
| Minor | 71.67 | 72.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.06 | Not specified |
| Pitch | 73.462 | 73.777 |
| Minor | 71.73 | 72.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 73.402 | 73.717 |
| Minor | 71.67 | 72.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.06 | Not specified |
| Pitch | 73.462 | 73.862 |
| Minor | 71.73 | 72.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 73.402 | 73.802 |
| Minor | 71.67 | 72.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76.06 | Not specified |
| Pitch | 73.462 | 73.962 |
| Minor | 71.73 | 72.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 76 | Not specified |
| Pitch | 73.402 | 73.902 |
| Minor | 71.67 | 72.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.465 | 75.94 |
| Pitch | 73.106 | 73.342 |
| Root d3 | 70.642 | 71.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 75.465 | 75.94 |
| Pitch | 73.192 | 73.342 |
| Root d3 | 70.728 | 71.033 |
Cutting tap preparation
Pre-drill recommendation: 72 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 74.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.