M60 × 5.5 Metric Thread Dimensions
Nominal diameter 60 mm; pitch 5.5 mm.
Basic geometry
Basic pitch diameter: 56.428 mm. Basic minor diameter: 54.046 mm. Basic major diameter: 60 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 56.428 | 56.652 |
| Minor | 54.046 | 54.521 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.075 | Not specified |
| Pitch | 56.503 | 56.783 |
| Minor | 54.121 | 54.721 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 56.428 | 56.708 |
| Minor | 54.046 | 54.646 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.075 | Not specified |
| Pitch | 56.503 | 56.858 |
| Minor | 54.121 | 54.871 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 56.428 | 56.783 |
| Minor | 54.046 | 54.796 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.075 | Not specified |
| Pitch | 56.503 | 56.953 |
| Minor | 54.121 | 55.071 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 56.428 | 56.878 |
| Minor | 54.046 | 54.996 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.075 | Not specified |
| Pitch | 56.503 | 57.063 |
| Minor | 54.121 | 55.301 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 56.428 | 56.988 |
| Minor | 54.046 | 55.226 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 59.365 | 59.925 |
| Pitch | 56.088 | 56.353 |
| Root d3 | 52.7 | 53.177 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 59.365 | 59.925 |
| Pitch | 56.183 | 56.353 |
| Root d3 | 52.795 | 53.177 |
Cutting tap preparation
Pre-drill recommendation: 54.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 57.5 mm. Approximate formation model. Estimated formation: 66.8%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.