M60 × 2 Metric Thread Dimensions
Nominal diameter 60 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 58.701 mm. Basic minor diameter: 57.835 mm. Basic major diameter: 60 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 58.701 | 58.851 |
| Minor | 57.835 | 58.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.038 | Not specified |
| Pitch | 58.739 | 58.929 |
| Minor | 57.873 | 58.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 58.701 | 58.891 |
| Minor | 57.835 | 58.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.038 | Not specified |
| Pitch | 58.739 | 58.975 |
| Minor | 57.873 | 58.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 58.701 | 58.937 |
| Minor | 57.835 | 58.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.038 | Not specified |
| Pitch | 58.739 | 59.039 |
| Minor | 57.873 | 58.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 58.701 | 59.001 |
| Minor | 57.835 | 58.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.038 | Not specified |
| Pitch | 58.739 | 59.114 |
| Minor | 57.873 | 58.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 58.701 | 59.076 |
| Minor | 57.835 | 58.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 59.682 | 59.962 |
| Pitch | 58.483 | 58.663 |
| Root d3 | 57.251 | 57.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 59.682 | 59.962 |
| Pitch | 58.551 | 58.663 |
| Root d3 | 57.319 | 57.508 |
Cutting tap preparation
Pre-drill recommendation: 58 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 59.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.