M60 × 3 Metric Thread Dimensions
Nominal diameter 60 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 58.051 mm. Basic minor diameter: 56.752 mm. Basic major diameter: 60 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 58.051 | 58.231 |
| Minor | 56.752 | 57.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.048 | Not specified |
| Pitch | 58.099 | 58.323 |
| Minor | 56.8 | 57.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 58.051 | 58.275 |
| Minor | 56.752 | 57.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.048 | Not specified |
| Pitch | 58.099 | 58.379 |
| Minor | 56.8 | 57.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 58.051 | 58.331 |
| Minor | 56.752 | 57.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.048 | Not specified |
| Pitch | 58.099 | 58.454 |
| Minor | 56.8 | 57.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 58.051 | 58.406 |
| Minor | 56.752 | 57.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.048 | Not specified |
| Pitch | 58.099 | 58.549 |
| Minor | 56.8 | 57.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 58.051 | 58.501 |
| Minor | 56.752 | 57.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 59.577 | 59.952 |
| Pitch | 57.791 | 58.003 |
| Root d3 | 55.943 | 56.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 59.577 | 59.952 |
| Pitch | 57.871 | 58.003 |
| Root d3 | 56.023 | 56.271 |
Cutting tap preparation
Pre-drill recommendation: 57 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 58.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.