M60 × 4 Metric Thread Dimensions
Nominal diameter 60 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 57.402 mm. Basic minor diameter: 55.67 mm. Basic major diameter: 60 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 57.402 | 57.602 |
| Minor | 55.67 | 56.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.06 | Not specified |
| Pitch | 57.462 | 57.712 |
| Minor | 55.73 | 56.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 57.402 | 57.652 |
| Minor | 55.67 | 56.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.06 | Not specified |
| Pitch | 57.462 | 57.777 |
| Minor | 55.73 | 56.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 57.402 | 57.717 |
| Minor | 55.67 | 56.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.06 | Not specified |
| Pitch | 57.462 | 57.862 |
| Minor | 55.73 | 56.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 57.402 | 57.802 |
| Minor | 55.67 | 56.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.06 | Not specified |
| Pitch | 57.462 | 57.962 |
| Minor | 55.73 | 56.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 57.402 | 57.902 |
| Minor | 55.67 | 56.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 59.465 | 59.94 |
| Pitch | 57.106 | 57.342 |
| Root d3 | 54.642 | 55.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 59.465 | 59.94 |
| Pitch | 57.192 | 57.342 |
| Root d3 | 54.728 | 55.033 |
Cutting tap preparation
Pre-drill recommendation: 56 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 58.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.