M60 × 1 Metric Thread Dimensions
Nominal diameter 60 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 59.35 mm. Basic minor diameter: 58.917 mm. Basic major diameter: 60 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 59.35 | 59.468 |
| Minor | 58.917 | 59.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.026 | Not specified |
| Pitch | 59.376 | 59.526 |
| Minor | 58.943 | 59.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 59.35 | 59.5 |
| Minor | 58.917 | 59.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.026 | Not specified |
| Pitch | 59.376 | 59.556 |
| Minor | 58.943 | 59.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 59.35 | 59.53 |
| Minor | 58.917 | 59.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60.026 | Not specified |
| Pitch | 59.376 | 59.612 |
| Minor | 58.943 | 59.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 60 | Not specified |
| Pitch | 59.35 | 59.586 |
| Minor | 58.917 | 59.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 59.794 | 59.974 |
| Pitch | 59.184 | 59.324 |
| Root d3 | 58.568 | 58.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 59.794 | 59.974 |
| Pitch | 59.234 | 59.324 |
| Root d3 | 58.618 | 58.747 |
Cutting tap preparation
Pre-drill recommendation: 59 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 59.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.