M52 × 5 Metric Thread Dimensions
Nominal diameter 52 mm; pitch 5 mm.
Basic geometry
Basic pitch diameter: 48.752 mm. Basic minor diameter: 46.587 mm. Basic major diameter: 52 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 48.752 | 48.964 |
| Minor | 46.587 | 47.037 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.071 | Not specified |
| Pitch | 48.823 | 49.088 |
| Minor | 46.658 | 47.218 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 48.752 | 49.017 |
| Minor | 46.587 | 47.147 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.071 | Not specified |
| Pitch | 48.823 | 49.158 |
| Minor | 46.658 | 47.368 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 48.752 | 49.087 |
| Minor | 46.587 | 47.297 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.071 | Not specified |
| Pitch | 48.823 | 49.248 |
| Minor | 46.658 | 47.558 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 48.752 | 49.177 |
| Minor | 46.587 | 47.487 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.071 | Not specified |
| Pitch | 48.823 | 49.353 |
| Minor | 46.658 | 47.778 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 48.752 | 49.282 |
| Minor | 46.587 | 47.707 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 51.399 | 51.929 |
| Pitch | 48.431 | 48.681 |
| Root d3 | 45.351 | 45.795 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 51.399 | 51.929 |
| Pitch | 48.521 | 48.681 |
| Root d3 | 45.441 | 45.795 |
Cutting tap preparation
Pre-drill recommendation: 47 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 49.8 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.