M52 × 4 Metric Thread Dimensions
Nominal diameter 52 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 49.402 mm. Basic minor diameter: 47.67 mm. Basic major diameter: 52 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 49.402 | 49.602 |
| Minor | 47.67 | 48.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.06 | Not specified |
| Pitch | 49.462 | 49.712 |
| Minor | 47.73 | 48.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 49.402 | 49.652 |
| Minor | 47.67 | 48.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.06 | Not specified |
| Pitch | 49.462 | 49.777 |
| Minor | 47.73 | 48.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 49.402 | 49.717 |
| Minor | 47.67 | 48.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.06 | Not specified |
| Pitch | 49.462 | 49.862 |
| Minor | 47.73 | 48.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 49.402 | 49.802 |
| Minor | 47.67 | 48.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.06 | Not specified |
| Pitch | 49.462 | 49.962 |
| Minor | 47.73 | 48.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 49.402 | 49.902 |
| Minor | 47.67 | 48.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 51.465 | 51.94 |
| Pitch | 49.106 | 49.342 |
| Root d3 | 46.642 | 47.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 51.465 | 51.94 |
| Pitch | 49.192 | 49.342 |
| Root d3 | 46.728 | 47.033 |
Cutting tap preparation
Pre-drill recommendation: 48 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 50.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.