M52 × 1 Metric Thread Dimensions
Nominal diameter 52 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 51.35 mm. Basic minor diameter: 50.917 mm. Basic major diameter: 52 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 51.35 | 51.468 |
| Minor | 50.917 | 51.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.026 | Not specified |
| Pitch | 51.376 | 51.526 |
| Minor | 50.943 | 51.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 51.35 | 51.5 |
| Minor | 50.917 | 51.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.026 | Not specified |
| Pitch | 51.376 | 51.556 |
| Minor | 50.943 | 51.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 51.35 | 51.53 |
| Minor | 50.917 | 51.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.026 | Not specified |
| Pitch | 51.376 | 51.612 |
| Minor | 50.943 | 51.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 51.35 | 51.586 |
| Minor | 50.917 | 51.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 51.794 | 51.974 |
| Pitch | 51.184 | 51.324 |
| Root d3 | 50.568 | 50.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 51.794 | 51.974 |
| Pitch | 51.234 | 51.324 |
| Root d3 | 50.618 | 50.747 |
Cutting tap preparation
Pre-drill recommendation: 51 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 51.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.