M52 × 2 Metric Thread Dimensions
Nominal diameter 52 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 50.701 mm. Basic minor diameter: 49.835 mm. Basic major diameter: 52 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 50.701 | 50.851 |
| Minor | 49.835 | 50.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.038 | Not specified |
| Pitch | 50.739 | 50.929 |
| Minor | 49.873 | 50.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 50.701 | 50.891 |
| Minor | 49.835 | 50.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.038 | Not specified |
| Pitch | 50.739 | 50.975 |
| Minor | 49.873 | 50.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 50.701 | 50.937 |
| Minor | 49.835 | 50.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.038 | Not specified |
| Pitch | 50.739 | 51.039 |
| Minor | 49.873 | 50.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 50.701 | 51.001 |
| Minor | 49.835 | 50.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.038 | Not specified |
| Pitch | 50.739 | 51.114 |
| Minor | 49.873 | 50.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 50.701 | 51.076 |
| Minor | 49.835 | 50.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 51.682 | 51.962 |
| Pitch | 50.483 | 50.663 |
| Root d3 | 49.251 | 49.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 51.682 | 51.962 |
| Pitch | 50.551 | 50.663 |
| Root d3 | 49.319 | 49.508 |
Cutting tap preparation
Pre-drill recommendation: 50 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 51.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.