M52 × 1.5 Metric Thread Dimensions
Nominal diameter 52 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 51.026 mm. Basic minor diameter: 50.376 mm. Basic major diameter: 52 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 51.026 | 51.158 |
| Minor | 50.376 | 50.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.032 | Not specified |
| Pitch | 51.058 | 51.228 |
| Minor | 50.408 | 50.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 51.026 | 51.196 |
| Minor | 50.376 | 50.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.032 | Not specified |
| Pitch | 51.058 | 51.27 |
| Minor | 50.408 | 50.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 51.026 | 51.238 |
| Minor | 50.376 | 50.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.032 | Not specified |
| Pitch | 51.058 | 51.323 |
| Minor | 50.408 | 50.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 51.026 | 51.291 |
| Minor | 50.376 | 50.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52.032 | Not specified |
| Pitch | 51.058 | 51.393 |
| Minor | 50.408 | 50.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 52 | Not specified |
| Pitch | 51.026 | 51.361 |
| Minor | 50.376 | 50.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 51.732 | 51.968 |
| Pitch | 50.834 | 50.994 |
| Root d3 | 49.91 | 50.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 51.732 | 51.968 |
| Pitch | 50.894 | 50.994 |
| Root d3 | 49.97 | 50.128 |
Cutting tap preparation
Pre-drill recommendation: 50.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 51.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.