M45 × 4.5 Metric Thread Dimensions
Nominal diameter 45 mm; pitch 4.5 mm.
Basic geometry
Basic pitch diameter: 42.077 mm. Basic minor diameter: 40.129 mm. Basic major diameter: 45 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 42.077 | 42.277 |
| Minor | 40.129 | 40.554 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.063 | Not specified |
| Pitch | 42.14 | 42.39 |
| Minor | 40.192 | 40.722 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 42.077 | 42.327 |
| Minor | 40.129 | 40.659 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.063 | Not specified |
| Pitch | 42.14 | 42.455 |
| Minor | 40.192 | 40.862 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 42.077 | 42.392 |
| Minor | 40.129 | 40.799 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.063 | Not specified |
| Pitch | 42.14 | 42.54 |
| Minor | 40.192 | 41.042 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 42.077 | 42.477 |
| Minor | 40.129 | 40.979 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.063 | Not specified |
| Pitch | 42.14 | 42.64 |
| Minor | 40.192 | 41.252 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 42.077 | 42.577 |
| Minor | 40.129 | 41.189 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 44.437 | 44.937 |
| Pitch | 41.778 | 42.014 |
| Root d3 | 39.006 | 39.416 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 44.437 | 44.937 |
| Pitch | 41.864 | 42.014 |
| Root d3 | 39.092 | 39.416 |
Cutting tap preparation
Pre-drill recommendation: 40.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 43 mm. Approximate formation model. Estimated formation: 65.4%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.