M45 × 2 Metric Thread Dimensions
Nominal diameter 45 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 43.701 mm. Basic minor diameter: 42.835 mm. Basic major diameter: 45 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 43.701 | 43.841 |
| Minor | 42.835 | 43.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.038 | Not specified |
| Pitch | 43.739 | 43.919 |
| Minor | 42.873 | 43.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 43.701 | 43.881 |
| Minor | 42.835 | 43.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.038 | Not specified |
| Pitch | 43.739 | 43.963 |
| Minor | 42.873 | 43.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 43.701 | 43.925 |
| Minor | 42.835 | 43.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.038 | Not specified |
| Pitch | 43.739 | 44.019 |
| Minor | 42.873 | 43.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 43.701 | 43.981 |
| Minor | 42.835 | 43.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.038 | Not specified |
| Pitch | 43.739 | 44.094 |
| Minor | 42.873 | 43.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 43.701 | 44.056 |
| Minor | 42.835 | 43.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 44.682 | 44.962 |
| Pitch | 43.493 | 43.663 |
| Root d3 | 42.261 | 42.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 44.682 | 44.962 |
| Pitch | 43.557 | 43.663 |
| Root d3 | 42.325 | 42.508 |
Cutting tap preparation
Pre-drill recommendation: 43 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 44.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.