M45 × 4 Metric Thread Dimensions
Nominal diameter 45 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 42.402 mm. Basic minor diameter: 40.67 mm. Basic major diameter: 45 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 42.402 | 42.592 |
| Minor | 40.67 | 41.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.06 | Not specified |
| Pitch | 42.462 | 42.698 |
| Minor | 40.73 | 41.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 42.402 | 42.638 |
| Minor | 40.67 | 41.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.06 | Not specified |
| Pitch | 42.462 | 42.762 |
| Minor | 40.73 | 41.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 42.402 | 42.702 |
| Minor | 40.67 | 41.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.06 | Not specified |
| Pitch | 42.462 | 42.837 |
| Minor | 40.73 | 41.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 42.402 | 42.777 |
| Minor | 40.67 | 41.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.06 | Not specified |
| Pitch | 42.462 | 42.937 |
| Minor | 40.73 | 41.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 42.402 | 42.877 |
| Minor | 40.67 | 41.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 44.465 | 44.94 |
| Pitch | 42.118 | 42.342 |
| Root d3 | 39.654 | 40.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 44.465 | 44.94 |
| Pitch | 42.202 | 42.342 |
| Root d3 | 39.738 | 40.033 |
Cutting tap preparation
Pre-drill recommendation: 41 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 43.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.