M45 × 1 Metric Thread Dimensions
Nominal diameter 45 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 44.35 mm. Basic minor diameter: 43.917 mm. Basic major diameter: 45 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 44.35 | 44.456 |
| Minor | 43.917 | 44.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.026 | Not specified |
| Pitch | 44.376 | 44.508 |
| Minor | 43.943 | 44.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 44.35 | 44.482 |
| Minor | 43.917 | 44.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.026 | Not specified |
| Pitch | 44.376 | 44.546 |
| Minor | 43.943 | 44.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 44.35 | 44.52 |
| Minor | 43.917 | 44.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.026 | Not specified |
| Pitch | 44.376 | 44.588 |
| Minor | 43.943 | 44.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 44.35 | 44.562 |
| Minor | 43.917 | 44.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 44.794 | 44.974 |
| Pitch | 44.199 | 44.324 |
| Root d3 | 43.583 | 43.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 44.794 | 44.974 |
| Pitch | 44.244 | 44.324 |
| Root d3 | 43.628 | 43.747 |
Cutting tap preparation
Pre-drill recommendation: 44 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 44.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.