M45 × 3 Metric Thread Dimensions
Nominal diameter 45 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 43.051 mm. Basic minor diameter: 41.752 mm. Basic major diameter: 45 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 43.051 | 43.221 |
| Minor | 41.752 | 42.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.048 | Not specified |
| Pitch | 43.099 | 43.311 |
| Minor | 41.8 | 42.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 43.051 | 43.263 |
| Minor | 41.752 | 42.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.048 | Not specified |
| Pitch | 43.099 | 43.364 |
| Minor | 41.8 | 42.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 43.051 | 43.316 |
| Minor | 41.752 | 42.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.048 | Not specified |
| Pitch | 43.099 | 43.434 |
| Minor | 41.8 | 42.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 43.051 | 43.386 |
| Minor | 41.752 | 42.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45.048 | Not specified |
| Pitch | 43.099 | 43.524 |
| Minor | 41.8 | 42.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 45 | Not specified |
| Pitch | 43.051 | 43.476 |
| Minor | 41.752 | 42.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 44.577 | 44.952 |
| Pitch | 42.803 | 43.003 |
| Root d3 | 40.955 | 41.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 44.577 | 44.952 |
| Pitch | 42.878 | 43.003 |
| Root d3 | 41.03 | 41.271 |
Cutting tap preparation
Pre-drill recommendation: 42 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 43.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.