M36 × 4 Metric Thread Dimensions
Nominal diameter 36 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 33.402 mm. Basic minor diameter: 31.67 mm. Basic major diameter: 36 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 33.402 | 33.592 |
| Minor | 31.67 | 32.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.06 | Not specified |
| Pitch | 33.462 | 33.698 |
| Minor | 31.73 | 32.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 33.402 | 33.638 |
| Minor | 31.67 | 32.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.06 | Not specified |
| Pitch | 33.462 | 33.762 |
| Minor | 31.73 | 32.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 33.402 | 33.702 |
| Minor | 31.67 | 32.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.06 | Not specified |
| Pitch | 33.462 | 33.837 |
| Minor | 31.73 | 32.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 33.402 | 33.777 |
| Minor | 31.67 | 32.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.06 | Not specified |
| Pitch | 33.462 | 33.937 |
| Minor | 31.73 | 32.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 33.402 | 33.877 |
| Minor | 31.67 | 32.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 35.465 | 35.94 |
| Pitch | 33.118 | 33.342 |
| Root d3 | 30.654 | 31.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 35.465 | 35.94 |
| Pitch | 33.202 | 33.342 |
| Root d3 | 30.738 | 31.033 |
Cutting tap preparation
Pre-drill recommendation: 32 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 34.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.