M36 × 3 Metric Thread Dimensions
Nominal diameter 36 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 34.051 mm. Basic minor diameter: 32.752 mm. Basic major diameter: 36 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 34.051 | 34.221 |
| Minor | 32.752 | 33.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.048 | Not specified |
| Pitch | 34.099 | 34.311 |
| Minor | 32.8 | 33.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 34.051 | 34.263 |
| Minor | 32.752 | 33.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.048 | Not specified |
| Pitch | 34.099 | 34.364 |
| Minor | 32.8 | 33.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 34.051 | 34.316 |
| Minor | 32.752 | 33.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.048 | Not specified |
| Pitch | 34.099 | 34.434 |
| Minor | 32.8 | 33.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 34.051 | 34.386 |
| Minor | 32.752 | 33.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.048 | Not specified |
| Pitch | 34.099 | 34.524 |
| Minor | 32.8 | 33.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 34.051 | 34.476 |
| Minor | 32.752 | 33.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 35.577 | 35.952 |
| Pitch | 33.803 | 34.003 |
| Root d3 | 31.955 | 32.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 35.577 | 35.952 |
| Pitch | 33.878 | 34.003 |
| Root d3 | 32.03 | 32.271 |
Cutting tap preparation
Pre-drill recommendation: 33 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 34.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.