M36 × 2 Metric Thread Dimensions
Nominal diameter 36 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 34.701 mm. Basic minor diameter: 33.835 mm. Basic major diameter: 36 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 34.701 | 34.841 |
| Minor | 33.835 | 34.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.038 | Not specified |
| Pitch | 34.739 | 34.919 |
| Minor | 33.873 | 34.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 34.701 | 34.881 |
| Minor | 33.835 | 34.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.038 | Not specified |
| Pitch | 34.739 | 34.963 |
| Minor | 33.873 | 34.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 34.701 | 34.925 |
| Minor | 33.835 | 34.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.038 | Not specified |
| Pitch | 34.739 | 35.019 |
| Minor | 33.873 | 34.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 34.701 | 34.981 |
| Minor | 33.835 | 34.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.038 | Not specified |
| Pitch | 34.739 | 35.094 |
| Minor | 33.873 | 34.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 34.701 | 35.056 |
| Minor | 33.835 | 34.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 35.682 | 35.962 |
| Pitch | 34.493 | 34.663 |
| Root d3 | 33.261 | 33.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 35.682 | 35.962 |
| Pitch | 34.557 | 34.663 |
| Root d3 | 33.325 | 33.508 |
Cutting tap preparation
Pre-drill recommendation: 34 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 35.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.