M36 × 1.5 Metric Thread Dimensions
Nominal diameter 36 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 35.026 mm. Basic minor diameter: 34.376 mm. Basic major diameter: 36 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 35.026 | 35.151 |
| Minor | 34.376 | 34.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.032 | Not specified |
| Pitch | 35.058 | 35.218 |
| Minor | 34.408 | 34.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 35.026 | 35.186 |
| Minor | 34.376 | 34.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.032 | Not specified |
| Pitch | 35.058 | 35.258 |
| Minor | 34.408 | 34.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 35.026 | 35.226 |
| Minor | 34.376 | 34.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.032 | Not specified |
| Pitch | 35.058 | 35.308 |
| Minor | 34.408 | 34.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 35.026 | 35.276 |
| Minor | 34.376 | 34.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.032 | Not specified |
| Pitch | 35.058 | 35.373 |
| Minor | 34.408 | 34.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 35.026 | 35.341 |
| Minor | 34.376 | 34.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 35.732 | 35.968 |
| Pitch | 34.844 | 34.994 |
| Root d3 | 33.92 | 34.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 35.732 | 35.968 |
| Pitch | 34.899 | 34.994 |
| Root d3 | 33.975 | 34.128 |
Cutting tap preparation
Pre-drill recommendation: 34.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 35.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.