M36 × 1 Metric Thread Dimensions
Nominal diameter 36 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 35.35 mm. Basic minor diameter: 34.917 mm. Basic major diameter: 36 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 35.35 | 35.456 |
| Minor | 34.917 | 35.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.026 | Not specified |
| Pitch | 35.376 | 35.508 |
| Minor | 34.943 | 35.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 35.35 | 35.482 |
| Minor | 34.917 | 35.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.026 | Not specified |
| Pitch | 35.376 | 35.546 |
| Minor | 34.943 | 35.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 35.35 | 35.52 |
| Minor | 34.917 | 35.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36.026 | Not specified |
| Pitch | 35.376 | 35.588 |
| Minor | 34.943 | 35.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 36 | Not specified |
| Pitch | 35.35 | 35.562 |
| Minor | 34.917 | 35.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 35.794 | 35.974 |
| Pitch | 35.199 | 35.324 |
| Root d3 | 34.583 | 34.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 35.794 | 35.974 |
| Pitch | 35.244 | 35.324 |
| Root d3 | 34.628 | 34.747 |
Cutting tap preparation
Pre-drill recommendation: 35 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 35.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.