M30 × 3.5 Metric Thread Dimensions
Nominal diameter 30 mm; pitch 3.5 mm.
Basic geometry
Basic pitch diameter: 27.727 mm. Basic minor diameter: 26.211 mm. Basic major diameter: 30 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 27.727 | 27.907 |
| Minor | 26.211 | 26.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.053 | Not specified |
| Pitch | 27.78 | 28.004 |
| Minor | 26.264 | 26.714 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 27.727 | 27.951 |
| Minor | 26.211 | 26.661 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.053 | Not specified |
| Pitch | 27.78 | 28.06 |
| Minor | 26.264 | 26.824 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 27.727 | 28.007 |
| Minor | 26.211 | 26.771 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.053 | Not specified |
| Pitch | 27.78 | 28.135 |
| Minor | 26.264 | 26.974 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 27.727 | 28.082 |
| Minor | 26.211 | 26.921 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.053 | Not specified |
| Pitch | 27.78 | 28.23 |
| Minor | 26.264 | 27.164 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 27.727 | 28.177 |
| Minor | 26.211 | 27.111 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 29.522 | 29.947 |
| Pitch | 27.462 | 27.674 |
| Root d3 | 25.306 | 25.653 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 29.522 | 29.947 |
| Pitch | 27.542 | 27.674 |
| Root d3 | 25.386 | 25.653 |
Cutting tap preparation
Pre-drill recommendation: 26.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 28.5 mm. Approximate formation model. Estimated formation: 63.0%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.