M30 × 3 Metric Thread Dimensions
Nominal diameter 30 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 28.051 mm. Basic minor diameter: 26.752 mm. Basic major diameter: 30 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 28.051 | 28.221 |
| Minor | 26.752 | 27.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.048 | Not specified |
| Pitch | 28.099 | 28.311 |
| Minor | 26.8 | 27.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 28.051 | 28.263 |
| Minor | 26.752 | 27.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.048 | Not specified |
| Pitch | 28.099 | 28.364 |
| Minor | 26.8 | 27.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 28.051 | 28.316 |
| Minor | 26.752 | 27.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.048 | Not specified |
| Pitch | 28.099 | 28.434 |
| Minor | 26.8 | 27.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 28.051 | 28.386 |
| Minor | 26.752 | 27.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.048 | Not specified |
| Pitch | 28.099 | 28.524 |
| Minor | 26.8 | 27.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 28.051 | 28.476 |
| Minor | 26.752 | 27.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 29.577 | 29.952 |
| Pitch | 27.803 | 28.003 |
| Root d3 | 25.955 | 26.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 29.577 | 29.952 |
| Pitch | 27.878 | 28.003 |
| Root d3 | 26.03 | 26.271 |
Cutting tap preparation
Pre-drill recommendation: 27 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 28.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.