M30 × 1 Metric Thread Dimensions
Nominal diameter 30 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 29.35 mm. Basic minor diameter: 28.917 mm. Basic major diameter: 30 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 29.35 | 29.456 |
| Minor | 28.917 | 29.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.026 | Not specified |
| Pitch | 29.376 | 29.508 |
| Minor | 28.943 | 29.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 29.35 | 29.482 |
| Minor | 28.917 | 29.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.026 | Not specified |
| Pitch | 29.376 | 29.546 |
| Minor | 28.943 | 29.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 29.35 | 29.52 |
| Minor | 28.917 | 29.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.026 | Not specified |
| Pitch | 29.376 | 29.588 |
| Minor | 28.943 | 29.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 29.35 | 29.562 |
| Minor | 28.917 | 29.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 29.794 | 29.974 |
| Pitch | 29.199 | 29.324 |
| Root d3 | 28.583 | 28.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 29.794 | 29.974 |
| Pitch | 29.244 | 29.324 |
| Root d3 | 28.628 | 28.747 |
Cutting tap preparation
Pre-drill recommendation: 29 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 29.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.