M30 × 2 Metric Thread Dimensions
Nominal diameter 30 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 28.701 mm. Basic minor diameter: 27.835 mm. Basic major diameter: 30 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 28.701 | 28.841 |
| Minor | 27.835 | 28.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.038 | Not specified |
| Pitch | 28.739 | 28.919 |
| Minor | 27.873 | 28.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 28.701 | 28.881 |
| Minor | 27.835 | 28.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.038 | Not specified |
| Pitch | 28.739 | 28.963 |
| Minor | 27.873 | 28.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 28.701 | 28.925 |
| Minor | 27.835 | 28.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.038 | Not specified |
| Pitch | 28.739 | 29.019 |
| Minor | 27.873 | 28.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 28.701 | 28.981 |
| Minor | 27.835 | 28.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.038 | Not specified |
| Pitch | 28.739 | 29.094 |
| Minor | 27.873 | 28.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 28.701 | 29.056 |
| Minor | 27.835 | 28.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 29.682 | 29.962 |
| Pitch | 28.493 | 28.663 |
| Root d3 | 27.261 | 27.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 29.682 | 29.962 |
| Pitch | 28.557 | 28.663 |
| Root d3 | 27.325 | 27.508 |
Cutting tap preparation
Pre-drill recommendation: 28 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 29.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.