M30 × 0.75 Metric Thread Dimensions
Nominal diameter 30 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 29.513 mm. Basic minor diameter: 29.188 mm. Basic major diameter: 30 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 29.513 | 29.608 |
| Minor | 29.188 | 29.306 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.022 | Not specified |
| Pitch | 29.535 | 29.653 |
| Minor | 29.21 | 29.36 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 29.513 | 29.631 |
| Minor | 29.188 | 29.338 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30.022 | Not specified |
| Pitch | 29.535 | 29.685 |
| Minor | 29.21 | 29.4 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 30 | Not specified |
| Pitch | 29.513 | 29.663 |
| Minor | 29.188 | 29.378 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 29.838 | 29.978 |
| Pitch | 29.379 | 29.491 |
| Root d3 | 28.917 | 29.058 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 29.838 | 29.978 |
| Pitch | 29.42 | 29.491 |
| Root d3 | 28.958 | 29.058 |
Cutting tap preparation
Pre-drill recommendation: 29.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 29.65 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.