M250 × 8 Metric Thread Dimensions
Nominal diameter 250 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 244.804 mm. Basic minor diameter: 241.34 mm. Basic major diameter: 250 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 244.804 | 245.104 |
| Minor | 241.34 | 241.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.1 | Not specified |
| Pitch | 244.904 | 245.279 |
| Minor | 241.44 | 242.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 244.804 | 245.179 |
| Minor | 241.34 | 242.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.1 | Not specified |
| Pitch | 244.904 | 245.379 |
| Minor | 241.44 | 242.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 244.804 | 245.279 |
| Minor | 241.34 | 242.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.1 | Not specified |
| Pitch | 244.904 | 245.504 |
| Minor | 241.44 | 242.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 244.804 | 245.404 |
| Minor | 241.34 | 242.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.1 | Not specified |
| Pitch | 244.904 | 245.654 |
| Minor | 241.44 | 243.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 244.804 | 245.554 |
| Minor | 241.34 | 242.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 249.19 | 249.9 |
| Pitch | 244.349 | 244.704 |
| Root d3 | 239.421 | 240.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 249.19 | 249.9 |
| Pitch | 244.48 | 244.704 |
| Root d3 | 239.552 | 240.085 |
Cutting tap preparation
Pre-drill recommendation: 242 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 246.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.