M250 × 2 Metric Thread Dimensions
Nominal diameter 250 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 248.701 mm. Basic minor diameter: 247.835 mm. Basic major diameter: 250 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 248.701 | 248.881 |
| Minor | 247.835 | 248.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.038 | Not specified |
| Pitch | 248.739 | 248.963 |
| Minor | 247.873 | 248.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 248.701 | 248.925 |
| Minor | 247.835 | 248.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.038 | Not specified |
| Pitch | 248.739 | 249.019 |
| Minor | 247.873 | 248.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 248.701 | 248.981 |
| Minor | 247.835 | 248.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.038 | Not specified |
| Pitch | 248.739 | 249.094 |
| Minor | 247.873 | 248.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 248.701 | 249.056 |
| Minor | 247.835 | 248.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.038 | Not specified |
| Pitch | 248.739 | 249.189 |
| Minor | 247.873 | 248.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 248.701 | 249.151 |
| Minor | 247.835 | 248.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 249.682 | 249.962 |
| Pitch | 248.451 | 248.663 |
| Root d3 | 247.219 | 247.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 249.682 | 249.962 |
| Pitch | 248.531 | 248.663 |
| Root d3 | 247.299 | 247.508 |
Cutting tap preparation
Pre-drill recommendation: 248 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 249.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.