M250 × 6 Metric Thread Dimensions
Nominal diameter 250 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 246.103 mm. Basic minor diameter: 243.505 mm. Basic major diameter: 250 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 246.103 | 246.368 |
| Minor | 243.505 | 244.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.08 | Not specified |
| Pitch | 246.183 | 246.518 |
| Minor | 243.585 | 244.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 246.103 | 246.438 |
| Minor | 243.505 | 244.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.08 | Not specified |
| Pitch | 246.183 | 246.608 |
| Minor | 243.585 | 244.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 246.103 | 246.528 |
| Minor | 243.505 | 244.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.08 | Not specified |
| Pitch | 246.183 | 246.713 |
| Minor | 243.585 | 244.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 246.103 | 246.633 |
| Minor | 243.505 | 244.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.08 | Not specified |
| Pitch | 246.183 | 246.853 |
| Minor | 243.585 | 244.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 246.103 | 246.773 |
| Minor | 243.505 | 244.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 249.32 | 249.92 |
| Pitch | 245.708 | 246.023 |
| Root d3 | 242.012 | 242.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 249.32 | 249.92 |
| Pitch | 245.823 | 246.023 |
| Root d3 | 242.127 | 242.559 |
Cutting tap preparation
Pre-drill recommendation: 244 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 247.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.