M250 × 4 Metric Thread Dimensions
Nominal diameter 250 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 247.402 mm. Basic minor diameter: 245.67 mm. Basic major diameter: 250 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 247.402 | 247.638 |
| Minor | 245.67 | 246.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.06 | Not specified |
| Pitch | 247.462 | 247.762 |
| Minor | 245.73 | 246.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 247.402 | 247.702 |
| Minor | 245.67 | 246.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.06 | Not specified |
| Pitch | 247.462 | 247.837 |
| Minor | 245.73 | 246.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 247.402 | 247.777 |
| Minor | 245.67 | 246.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.06 | Not specified |
| Pitch | 247.462 | 247.937 |
| Minor | 245.73 | 246.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 247.402 | 247.877 |
| Minor | 245.67 | 246.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.06 | Not specified |
| Pitch | 247.462 | 248.062 |
| Minor | 245.73 | 246.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 247.402 | 248.002 |
| Minor | 245.67 | 246.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 249.465 | 249.94 |
| Pitch | 247.062 | 247.342 |
| Root d3 | 244.598 | 245.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 249.465 | 249.94 |
| Pitch | 247.162 | 247.342 |
| Root d3 | 244.698 | 245.033 |
Cutting tap preparation
Pre-drill recommendation: 246 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 248.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.