M250 × 3 Metric Thread Dimensions
Nominal diameter 250 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 248.051 mm. Basic minor diameter: 246.752 mm. Basic major diameter: 250 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 248.051 | 248.263 |
| Minor | 246.752 | 247.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.048 | Not specified |
| Pitch | 248.099 | 248.364 |
| Minor | 246.8 | 247.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 248.051 | 248.316 |
| Minor | 246.752 | 247.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.048 | Not specified |
| Pitch | 248.099 | 248.434 |
| Minor | 246.8 | 247.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 248.051 | 248.386 |
| Minor | 246.752 | 247.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.048 | Not specified |
| Pitch | 248.099 | 248.524 |
| Minor | 246.8 | 247.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 248.051 | 248.476 |
| Minor | 246.752 | 247.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250.048 | Not specified |
| Pitch | 248.099 | 248.629 |
| Minor | 246.8 | 247.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 250 | Not specified |
| Pitch | 248.051 | 248.581 |
| Minor | 246.752 | 247.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 249.577 | 249.952 |
| Pitch | 247.753 | 248.003 |
| Root d3 | 245.905 | 246.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 249.577 | 249.952 |
| Pitch | 247.843 | 248.003 |
| Root d3 | 245.995 | 246.271 |
Cutting tap preparation
Pre-drill recommendation: 247 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 248.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.