M24 × 2.5 Metric Thread Dimensions
Nominal diameter 24 mm; pitch 2.5 mm.
Basic geometry
Basic pitch diameter: 22.376 mm. Basic minor diameter: 21.294 mm. Basic major diameter: 24 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 22.376 | 22.526 |
| Minor | 21.294 | 21.574 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.042 | Not specified |
| Pitch | 22.418 | 22.608 |
| Minor | 21.336 | 21.691 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 22.376 | 22.566 |
| Minor | 21.294 | 21.649 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.042 | Not specified |
| Pitch | 22.418 | 22.654 |
| Minor | 21.336 | 21.786 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 22.376 | 22.612 |
| Minor | 21.294 | 21.744 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.042 | Not specified |
| Pitch | 22.418 | 22.718 |
| Minor | 21.336 | 21.896 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 22.376 | 22.676 |
| Minor | 21.294 | 21.854 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.042 | Not specified |
| Pitch | 22.418 | 22.793 |
| Minor | 21.336 | 22.046 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 22.376 | 22.751 |
| Minor | 21.294 | 22.004 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 23.623 | 23.958 |
| Pitch | 22.154 | 22.334 |
| Root d3 | 20.614 | 20.891 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 23.623 | 23.958 |
| Pitch | 22.222 | 22.334 |
| Root d3 | 20.682 | 20.891 |
Cutting tap preparation
Pre-drill recommendation: 21.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 22.9 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.