M24 × 2 Metric Thread Dimensions
Nominal diameter 24 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 22.701 mm. Basic minor diameter: 21.835 mm. Basic major diameter: 24 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 22.701 | 22.841 |
| Minor | 21.835 | 22.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.038 | Not specified |
| Pitch | 22.739 | 22.919 |
| Minor | 21.873 | 22.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 22.701 | 22.881 |
| Minor | 21.835 | 22.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.038 | Not specified |
| Pitch | 22.739 | 22.963 |
| Minor | 21.873 | 22.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 22.701 | 22.925 |
| Minor | 21.835 | 22.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.038 | Not specified |
| Pitch | 22.739 | 23.019 |
| Minor | 21.873 | 22.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 22.701 | 22.981 |
| Minor | 21.835 | 22.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.038 | Not specified |
| Pitch | 22.739 | 23.094 |
| Minor | 21.873 | 22.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 22.701 | 23.056 |
| Minor | 21.835 | 22.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 23.682 | 23.962 |
| Pitch | 22.493 | 22.663 |
| Root d3 | 21.261 | 21.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 23.682 | 23.962 |
| Pitch | 22.557 | 22.663 |
| Root d3 | 21.325 | 21.508 |
Cutting tap preparation
Pre-drill recommendation: 22 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 23.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.