M24 × 1 Metric Thread Dimensions
Nominal diameter 24 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 23.35 mm. Basic minor diameter: 22.917 mm. Basic major diameter: 24 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 23.35 | 23.456 |
| Minor | 22.917 | 23.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.026 | Not specified |
| Pitch | 23.376 | 23.508 |
| Minor | 22.943 | 23.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 23.35 | 23.482 |
| Minor | 22.917 | 23.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.026 | Not specified |
| Pitch | 23.376 | 23.546 |
| Minor | 22.943 | 23.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 23.35 | 23.52 |
| Minor | 22.917 | 23.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.026 | Not specified |
| Pitch | 23.376 | 23.588 |
| Minor | 22.943 | 23.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 23.35 | 23.562 |
| Minor | 22.917 | 23.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 23.794 | 23.974 |
| Pitch | 23.199 | 23.324 |
| Root d3 | 22.583 | 22.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 23.794 | 23.974 |
| Pitch | 23.244 | 23.324 |
| Root d3 | 22.628 | 22.747 |
Cutting tap preparation
Pre-drill recommendation: 23 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 23.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.