M24 × 0.75 Metric Thread Dimensions
Nominal diameter 24 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 23.513 mm. Basic minor diameter: 23.188 mm. Basic major diameter: 24 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 23.513 | 23.608 |
| Minor | 23.188 | 23.306 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.022 | Not specified |
| Pitch | 23.535 | 23.653 |
| Minor | 23.21 | 23.36 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 23.513 | 23.631 |
| Minor | 23.188 | 23.338 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.022 | Not specified |
| Pitch | 23.535 | 23.685 |
| Minor | 23.21 | 23.4 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 23.513 | 23.663 |
| Minor | 23.188 | 23.378 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 23.838 | 23.978 |
| Pitch | 23.379 | 23.491 |
| Root d3 | 22.917 | 23.058 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 23.838 | 23.978 |
| Pitch | 23.42 | 23.491 |
| Root d3 | 22.958 | 23.058 |
Cutting tap preparation
Pre-drill recommendation: 23.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 23.65 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.