M24 × 1.5 Metric Thread Dimensions
Nominal diameter 24 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 23.026 mm. Basic minor diameter: 22.376 mm. Basic major diameter: 24 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 23.026 | 23.151 |
| Minor | 22.376 | 22.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.032 | Not specified |
| Pitch | 23.058 | 23.218 |
| Minor | 22.408 | 22.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 23.026 | 23.186 |
| Minor | 22.376 | 22.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.032 | Not specified |
| Pitch | 23.058 | 23.258 |
| Minor | 22.408 | 22.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 23.026 | 23.226 |
| Minor | 22.376 | 22.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.032 | Not specified |
| Pitch | 23.058 | 23.308 |
| Minor | 22.408 | 22.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 23.026 | 23.276 |
| Minor | 22.376 | 22.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24.032 | Not specified |
| Pitch | 23.058 | 23.373 |
| Minor | 22.408 | 22.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 24 | Not specified |
| Pitch | 23.026 | 23.341 |
| Minor | 22.376 | 22.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 23.732 | 23.968 |
| Pitch | 22.844 | 22.994 |
| Root d3 | 21.92 | 22.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 23.732 | 23.968 |
| Pitch | 22.899 | 22.994 |
| Root d3 | 21.975 | 22.128 |
Cutting tap preparation
Pre-drill recommendation: 22.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 23.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.