M240 × 8 Metric Thread Dimensions
Nominal diameter 240 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 234.804 mm. Basic minor diameter: 231.34 mm. Basic major diameter: 240 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 234.804 | 235.104 |
| Minor | 231.34 | 231.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.1 | Not specified |
| Pitch | 234.904 | 235.279 |
| Minor | 231.44 | 232.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 234.804 | 235.179 |
| Minor | 231.34 | 232.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.1 | Not specified |
| Pitch | 234.904 | 235.379 |
| Minor | 231.44 | 232.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 234.804 | 235.279 |
| Minor | 231.34 | 232.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.1 | Not specified |
| Pitch | 234.904 | 235.504 |
| Minor | 231.44 | 232.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 234.804 | 235.404 |
| Minor | 231.34 | 232.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.1 | Not specified |
| Pitch | 234.904 | 235.654 |
| Minor | 231.44 | 233.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 234.804 | 235.554 |
| Minor | 231.34 | 232.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 239.19 | 239.9 |
| Pitch | 234.349 | 234.704 |
| Root d3 | 229.421 | 230.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 239.19 | 239.9 |
| Pitch | 234.48 | 234.704 |
| Root d3 | 229.552 | 230.085 |
Cutting tap preparation
Pre-drill recommendation: 232 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 236.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.