M240 × 4 Metric Thread Dimensions
Nominal diameter 240 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 237.402 mm. Basic minor diameter: 235.67 mm. Basic major diameter: 240 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 237.402 | 237.638 |
| Minor | 235.67 | 236.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.06 | Not specified |
| Pitch | 237.462 | 237.762 |
| Minor | 235.73 | 236.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 237.402 | 237.702 |
| Minor | 235.67 | 236.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.06 | Not specified |
| Pitch | 237.462 | 237.837 |
| Minor | 235.73 | 236.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 237.402 | 237.777 |
| Minor | 235.67 | 236.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.06 | Not specified |
| Pitch | 237.462 | 237.937 |
| Minor | 235.73 | 236.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 237.402 | 237.877 |
| Minor | 235.67 | 236.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.06 | Not specified |
| Pitch | 237.462 | 238.062 |
| Minor | 235.73 | 236.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 237.402 | 238.002 |
| Minor | 235.67 | 236.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 239.465 | 239.94 |
| Pitch | 237.062 | 237.342 |
| Root d3 | 234.598 | 235.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 239.465 | 239.94 |
| Pitch | 237.162 | 237.342 |
| Root d3 | 234.698 | 235.033 |
Cutting tap preparation
Pre-drill recommendation: 236 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 238.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.