M240 × 2 Metric Thread Dimensions
Nominal diameter 240 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 238.701 mm. Basic minor diameter: 237.835 mm. Basic major diameter: 240 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 238.701 | 238.881 |
| Minor | 237.835 | 238.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.038 | Not specified |
| Pitch | 238.739 | 238.963 |
| Minor | 237.873 | 238.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 238.701 | 238.925 |
| Minor | 237.835 | 238.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.038 | Not specified |
| Pitch | 238.739 | 239.019 |
| Minor | 237.873 | 238.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 238.701 | 238.981 |
| Minor | 237.835 | 238.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.038 | Not specified |
| Pitch | 238.739 | 239.094 |
| Minor | 237.873 | 238.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 238.701 | 239.056 |
| Minor | 237.835 | 238.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.038 | Not specified |
| Pitch | 238.739 | 239.189 |
| Minor | 237.873 | 238.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 238.701 | 239.151 |
| Minor | 237.835 | 238.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 239.682 | 239.962 |
| Pitch | 238.451 | 238.663 |
| Root d3 | 237.219 | 237.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 239.682 | 239.962 |
| Pitch | 238.531 | 238.663 |
| Root d3 | 237.299 | 237.508 |
Cutting tap preparation
Pre-drill recommendation: 238 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 239.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.