M240 × 3 Metric Thread Dimensions
Nominal diameter 240 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 238.051 mm. Basic minor diameter: 236.752 mm. Basic major diameter: 240 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 238.051 | 238.263 |
| Minor | 236.752 | 237.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.048 | Not specified |
| Pitch | 238.099 | 238.364 |
| Minor | 236.8 | 237.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 238.051 | 238.316 |
| Minor | 236.752 | 237.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.048 | Not specified |
| Pitch | 238.099 | 238.434 |
| Minor | 236.8 | 237.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 238.051 | 238.386 |
| Minor | 236.752 | 237.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.048 | Not specified |
| Pitch | 238.099 | 238.524 |
| Minor | 236.8 | 237.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 238.051 | 238.476 |
| Minor | 236.752 | 237.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.048 | Not specified |
| Pitch | 238.099 | 238.629 |
| Minor | 236.8 | 237.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 238.051 | 238.581 |
| Minor | 236.752 | 237.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 239.577 | 239.952 |
| Pitch | 237.753 | 238.003 |
| Root d3 | 235.905 | 236.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 239.577 | 239.952 |
| Pitch | 237.843 | 238.003 |
| Root d3 | 235.995 | 236.271 |
Cutting tap preparation
Pre-drill recommendation: 237 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 238.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.