M240 × 6 Metric Thread Dimensions
Nominal diameter 240 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 236.103 mm. Basic minor diameter: 233.505 mm. Basic major diameter: 240 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 236.103 | 236.368 |
| Minor | 233.505 | 234.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.08 | Not specified |
| Pitch | 236.183 | 236.518 |
| Minor | 233.585 | 234.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 236.103 | 236.438 |
| Minor | 233.505 | 234.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.08 | Not specified |
| Pitch | 236.183 | 236.608 |
| Minor | 233.585 | 234.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 236.103 | 236.528 |
| Minor | 233.505 | 234.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.08 | Not specified |
| Pitch | 236.183 | 236.713 |
| Minor | 233.585 | 234.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 236.103 | 236.633 |
| Minor | 233.505 | 234.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240.08 | Not specified |
| Pitch | 236.183 | 236.853 |
| Minor | 233.585 | 234.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 240 | Not specified |
| Pitch | 236.103 | 236.773 |
| Minor | 233.505 | 234.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 239.32 | 239.92 |
| Pitch | 235.708 | 236.023 |
| Root d3 | 232.012 | 232.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 239.32 | 239.92 |
| Pitch | 235.823 | 236.023 |
| Root d3 | 232.127 | 232.559 |
Cutting tap preparation
Pre-drill recommendation: 234 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 237.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.